Manufacturer's Suggested Retail Price excludes shipping costs, dealer assembly/prep, taxes or import duties.
Slidepad simplifies stopping by using only one lever to operate both front and rear brakes. By smartly using the momentum of the rear
wheel to actively modulate the front brake, Slidepad enables smooth, controlled stopping with only one hand.
While tests show that an experienced rider using a two-lever braking system can stop in approximately 11.3% shorter distance than on a
single-lever Slidepad system, the reality is that many casual riders often do not fully understand which brake lever to utilize in different
situations, or do not know how to properly modulate front and rear brakes. These riders tend to rely on their rear brake exclusively over
their front brake, and in these instances, Slidepad stops in 46% LESS distance than when using the rear brake only. It’s like getting the front
brake (modulated) for free!
Though we do make bikes with frame geometry and component sizing specifically targeted for women, not every woman is best suited or fitted on such a bike. We want to be clear about that from the outset. As always, the best advice for buying a bike is to go to your LBS, where you can be properly fitted on a bike. One of our “unisex” sizes just might be the perfect fit for you (though a swap for a saddle with a wider sit-bones platform will likely be recommended). But if you discover that you are, in fact, best fitted on one of our Femme geometry bikes, of which there are many, here’s what you’ll find:
• Top tubes will be shorter; stems shorter too, with seat tube angles possibly steepened, all to reduce the distance from saddle-to-bar for a more comfortable reach.
• Head tube angles may be relaxed and fork rake increased to eliminate or minimize the potential for wheel-toe overlap,
• Bottom bracket height may be dropped so standover clearance is increased and center of gravity is lowered.
• Handlebars will often be narrower with a shorter reach to the flats and drops.
• Brakes/Shift levers will often have a shorter reach as well and cranks arms may be shorter for any given frame size in comparison to the unisex version.
• Saddles will generally be shorter and wider, often with a pressure relief zone.
• We may even alter the weight and stiffness of our frame materials to better suit a lighter-weight rider (see SST info below)
And we make all our Femme bikes in a broad sizing range – from 44cm to 54cm, or 14” to 18”, so you can be assured of finding a Jamis Femme that fits perfectly.
All our frames and forks are tested continually to meet or exceed (in some cases, well exceed) EN standards 14764, 14765, 14766 and 14781 as well as the new ISO 4210 standards. We conduct these tests at our frame manufacturing facilities, but we also use EN accredited testing laboratories such as Intertek and SGS to verify the results of our own tests. If these tests aren’t telling us everything we want to know about our bikes, we increase the loads and cycles, or we determine another way to test. Where current hydraulic testing machines, jigs and hardware aren’t up to the task of emulating some of the forces and impacts our bikes might be subject to, we’ve designed our own.
We relentlessly cycle test for fatigue from pedaling and torsional forces on every single frame size, with deflection tests for stiffness at every point of the frame. Brutal impact tests with massive weights dropped on fixed frames or forks are performed. Then reversed, with weights attached to the frame, the frame hoisted to a given height depending upon product type, then released.
This destructive testing is enormously instructive and important. And it is in continual process. But it’s our ongoing non-destructive testing of frames and forks fresh off the factory floor that’s just as vital.
For our carbon fiber frames, EVERY frame is weighed to make sure it’s neither resin rich nor resin deficient. We also measure the stiffness of each frame in 6 critical areas as a check on lay-up production. Each deflection test must fall within 5% of the standards our machine and field-testing have established. This weighing and stiffness deflection testing guarantees every single frame we produce meets all Jamis manufacturing protocol and will
deliver the ride qualities we defined and demand.
When it comes to recreational riding on a so-called comfort bike, nothing gets more uncomfortable faster than having to pedal more weight than necessary. Which is why all Hudsons are built with lightweight 6061 aluminum tubing. We design comfort into the naturally stiffer ride of the aluminum tubes by specifying large volume tires and lengthening the chainstays and wheelbase for a stretch-limo sort of ride.
Specially designed for flat-footed starts and stops. With your weight evenly distributed over the crank for comfortable and efficient pedaling on the saddle or off. The Hudson’s laid back seat tube and lowered bottom bracket height allows riders to position their saddles for efficient leg extension and still easily reach the ground while seated for balance when stopped. The longer chainstays and wheelbase in tandem with the lower center of gravity offers a very smooth, stable ride.
All frame sizes (and there are six to assure the best possible fit for greater comfort and more secure handling) offer an extra long head tube and hi-rise handlebars for a comfortable, uprght ride position.
Our step-through version is exceptionally easy to mount thanks to the low BB DROP and super-low position of the S-bent top tube. No more swinging a leg over the rear wheel, or pulling a knee up to the chest to step over the top tube to mount a bike.
SureStop’s new braking system simplifies stopping by requiring only one brake lever to operate both front & rear brakes. It makes riding safer too by reducing the risk of front wheel lock-up. SureStop uses the momentum of the rear wheel to actively modulate the front brake, enabling smooth, controlled stopping. With only one hand!
Our super plush saddle features Memory Foam padding for optimum support with maximum comfort. The slip-resistant suede-like top prevents sliding and the burnished side panels reduce leg friction while pedaling. Elastomer springs also help to soak up road vibrations. Offered in gender-specific sizes.
Using gears is supposed to make cycling easy, not a chore. That’s why our Hudsons are available in single, three or seven-speed versions only. Every shift is a one-handed cinch.
The Hudson’s alloy crankset features an outer-ring chainguard. With another full length changuard running the length of the chain from seatstay to chainring. So socks, slacks, skirts and dresses are well protected from the chain.
UPGRADES FROM HUDSON EASY-3
• 7-speed Shimano drivetrain
• SureStop single lever braking system
• Stronger, double-wall aluminum rims
TOP FIVE THINGS YOU NEED TO KNOW
SureStop's new braking system simplifies stopping by requiring only one brake lever to operate both front & rear brakes. And it makes riding safer too by reducing the risk of front wheel lock-up. SureStop uses the momentum of the rear wheel to actively modulate the front brake, enabling smooth, controlled stopping.
The Hudson Sport offers a 7-speed Shimano twist-shifting, single chainring drivetrain that's simple to operate (only one shifter to command!) and is lighter than multiple chainring bikes.
Our smooth-rolling 26 x 1.95” Sport Comfort tires are more comfortable to ride around town than full knobby mountain bike tires.
The sealed cartridge bottom bracket & sealed headset improve performance and reduce maintenance.
Our long quilled, short-reach stem and 3” rise handlebars offer a supremely comfortable, upright ride position that's easy on neck & wrists.
|Frame||6061 TIG-welded aluminum, Hudson laid-back design with low ride height, internal cable routing, replaceable derailleur hanger, alloy kickstand|
|Fork||Hi-tensile unicrown with radiused blades|
|Headset||Internal cup, threaded, 1 1/8”|
|Wheels||Alex DC25 alloy double-wall rims, 36H, Formula alloy QR hubs, 14g black stainless steel spokes|
|Tires||Jamis Sport Comfort, 26 x 1.95”, with whitewalls or skinwalls|
|Derailleurs||Shimano RD-TX55 rear|
|Shiftlevers||Shimano RevoShift SL-RS35, 7-speed|
|Cassette||Shimano freewheel 7-speed, 14-34|
|Crankset||Forged alloy crank, single 42T chainring, 170mm, with full length chainguard|
|BB Set||Sealed cartridge, 68 x 122.5mm|
|Brakeset||Slidepad braking system with ProMax forged alloy direct pull brakes & Tektro alloy comfort lever|
|Handlebar||Hi-rise comfort, 15º sweep x 80mm rise x 640mm wide|
|Stem||Jamis alloy, 180mm quill x 80mm extension|
|Seat Post||Alloy micro-adjust, 31.6 x 300mm, with alloy QR clamp|
|Saddle||Jamis Comfort with memory foam, synthetic suede top, burnished side panels and bumper springs|
|Sizes||M: S (13”), M (15)”, L (18”), XL (21”) S/T: S (14”), M (17”)|
|Color||M: Dakota Grey, Winter Blue, Cayenne S/T: Radiant Teal, Cayenne, Grape Jelly, Lemonade|
|SIZE||TOP EFFECTIVE||HEAD ANGLE||SEAT ANGLE||CHAIN STAY||WHEEL BASE||FORK RAKE||BB HEIGHT||HEAD TUBE||STANDOVER|
FIT & SIZING