Your
Jamis dual suspension bicycle has an advanced
multi-link suspension design. Proper care and maintenance
is critical to your safety and also to insure long
lasting performance.
All maintenance and repairs
should be performed by your Jamis dealer.
SETUP & MAINTENANCE
For proper
set up and maintenance please consult the owners
manual for the suspension fork and/or rear shock
that you received with your bicycle. If you did
not receive the manual(s) please contact the
fork or shock manufacturer and they can send
you one, or download one from their website...
Before
every ride, ensure that the suspension fork
and rear shock is operating properly.
2.
After
every 10 hours of use inspect the front fork
to make sure there is no hydraulic oil leaking
from the fork and that it is operating properly.
3.
On
the rear suspension, check shock mounting
bolts and the pivot bolts for tightness.
4.
For
other areas that should be checked, consult
your owner’s manual for your front
fork and/or rear shock.
5.
Once
a month check for bearing wear. Place one
hand on top of the rear tire, and grasp the
seatpost with the other. Try to move the
rear wheel from side to side, if you feel
any looseness, take the bike to your Jamis
dealer for service.
WARNING: Failure
to maintain, check and properly adjust the suspension
system may result in suspension alfunction, which may
cause you to lose control and fall.
JAMIS SUSPENSION
FRAME INFORMATION
Click
links below to download information regarding
replacement parts and technical information.
These
replacement parts may only be ordered
through your Authorized Jamis Dealer
at this time.
